Dashcam Accessories
Sort by
Show result

Adhesive Mount
Exclusively for Transcend's DrivePro dashcams, the adhesive mount features a strong adhesive pad, a locking T tip and a 360° swivel, allowing you to easily adjust your mount to any desired angle.

Installation Guide
1. Clean the area of the windshield where the adhesive pad will be placed.
2. Remove the protective film and firmly press the adhesive pad onto the windshield.
3. Allow at least 24 hours for the mount to properly adhere to the surface.
4. Insert and slide the dashcam into the adhesive mount.

Dimensions    
51 mm x 29 mm x 55 mm (2.01" x 1.14" x 2.17")
Weight
15 g (0.53 oz)
Adhesive Cup
51 mm x 29 mm (2.01" x 1.14")

Supported Device    
DrivePro 110/DrivePro 230/DrivePro 550
**Note: This product not work with the DrivePro 10.

Warranty    
One-year Limited Warranty

RM39.00

Car Lighter Adapter
Transcend's car lighter adapter features a four-meter USB cable, LED light indicator, and short circuit protection. Easy to install, the car lighter adapter is perfect for Transcend's DrivePro dashcams.

Key Features
• 4-meter micro-USB cable for flexible routing and easy wiring
• LED light indicator
• Stable power supply is provided
• Output short circuit protection
• Suitable for Transcend’s DrivePro dashcams

Dimensions
- 104.7 mm x 44 mm x 29.3 mm (4.12" x 1.73" x 1.15")
Weight
- 157 g (5.54 oz)
Cable Length
- 4 m (13.12 ft)

Input Voltage
- 10V ~ 28V
Output Voltage
- 5V / 2A
Fuse
- 250V / 1A
Supported Device    
- DrivePro 110/DrivePro 230/DrivePro 550/DrivePro 10

Warranty    
- One-year Limited Warranty

RM47.00

Hardwire Power Cable (micro-USB)
Transcend's hardwire power cable allows users to wire their DrivePro dashcams directly into their vehicle's fuse box. Transcend's hardwire power cable has built-in power protection circuitry to prevent damage to either your vehicle or your DrivePro dashcam in the case of a short circuit or power surge.

Highlights:
• 4-meter micro-USB cable for flexible routing and easy wiring
• Stable power supply is provided
• Output short circuit protection
• Suitable for Transcend’s DrivePro dashcams

Weight
- 83 g (2.93 oz)
Cable Length
- 4 m (13.12 ft)

Input Voltage
- 10V ~ 28V
Output Voltage
- 5V / 2A

Supported Device    
- DrivePro 110/DrivePro 130/DrivePro 230/DrivePro 550/DrivePro 10
**Note: Professional installation recommended.

Warranty    
- One-year Limited Warranty

RM64.00

Suction Mount
Exclusively for Transcend's DrivePro dashcams, the suction mount features a lockable suction pad, a locking T tip and a 360° swivel, allowing you to easily adjust your mount to any desired angle.

Installation Guide
1. Clean the area of the windshield where the suction cup will be mounted.
2. Remove the protective film and position the suction cup on the windshield.
3. While holding the base firmly, press down on the locker lever.
4. Insert and slide the dashcam into the suction mount.

Dimensions    54.6 mm x ø44.5 mm (2.15" x ø1.75")
Weight    26.6 g (0.94 oz)
Suction Cup    
45mm diameter

Supported Device:    
DrivePro 110/DrivePro 230/DrivePro 550
**Note: This product not work with the DrivePro 10.

Warranty    
One-year Limited Warranty

RM40.00